Showing all 13 results
Orion Model 796
-80°C to 300°C, 470mm Immersion.
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
Cryostat Model 459
-80°C to -180°C
A Cryostat to calibrate thermometers over the range -80°C to -180°C, It requires the use of liquid nitrogen.
Fluidised Furnace Model 875
50°C to 700°C
The Isotech fluidised calibration bath out performs dangerous salt baths in all respects: wider temperature range, less hazardous and better uncertainties.
Hydra Model 798
-80°C to 300°C, 300mm Immersion.
Precision calibration of thermometers calls for the use of stirred liquid calibration baths. The Hydra models set new standards in terms of price to performance ratio.
Isotech Model 909 SPRT
-196°C to 670°C
This economically-priced Standard Platinum Resistance Thermometer, Model 909, is the workhorse of calibration laboratories all over the world.
Large Volume Liquid Bath Model 820
30°C to 200°C
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution. The 820 bath has been introduced to provide a liquid calibration bath with a large volume.
Nitrogen Boiling Point Apparatus Model 18205
-185°C to -196°C
Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium (boiling point) of nitrogen or argon, for the calibration of thermometers on the International Temperature Scale of 1990.
Parallel Tube Liquid Bath Libra Model 785
Best performance, -80°C to 300°C
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties.
Parallel Tube Liquid Bath Model 915
-65°C to 300°C
The 915 is, no question, the finest stirred liquid parallel tube bath produced.
Saturn Model 877
100°C to 1300°C
The Saturn spherical furnace comprises a number of concentric shells. The outer shell of spun metal is for containment and support.
Simple Nitrogen Boiling Point Apparatus Model 461
This model is a lower cost alternative to the ITL M 18205. This model is a simple apparatus open to the atmosphere comprising a stainless steel dewar flask filled with liquid Nitrogen, an insulating layer which houses a metallic equalising block and thermometer holder
Standard Thermocouple Model 1600 NCJ
Platinum Thermocouple, 0°C to 1600°C
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C.
Stirred Ice Bath Model 813
Simple Stirred Ice/Water Bath, 0°C
The most used temperature for calibration is 0°C.