Showing 19–36 of 100 results
-25°C to 140°C, Large 50 x 300mm Volume
The Oceanus-6 is a complete calibration laboratory working over the temperature range 45°C below ambient temperature to +140°C. It permits the calibration of temperature sensors absolutely (at fixed points of the ITS-90 scale) or by comparison to a reference standard.
POTTS – Europa-6 Model 520
65°C below ambient to +140°C
The multi-functions of the Europa-6 is a unique award winning concept from Isotech.
Ambient to 1000°C
The Annealing Furnace, model 414, is designed to heat, anneal and cool Standard Platinum Resistance Thermometers (SPRTs) prior to calibration.
Blackbody ITS-90 Fixed Points
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep.
Blackbody Source Model 988
20°C to 45°C
First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus.
8 Way Selector Switches Models 954 and 958
Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples.
The purpose of Cal NotePad (CNP) is to automatically log and display the temperature of an Isotech calibration bath together with the unit under test. Cal NotePad can be used with baths (or indicators) without PC interfaces by the user typing in values from the keyboard.
Copper Point SPRT Model 108462
0°C to 1100°C
Isotech has a long history of making SPRTs to the Silver point (Model 96178) and this experience was combined with new research to produce the new copper point SPRT (Model 108462).
Cryostat Model 459
-80°C to -180°C
An apparatus immersed in liquid nitrogen will cool to approximately -195°C. Our design, using a controller and heater, permits the cryostat to be set at any temperature above liquid nitrogen temperature.
Cyclops Model 878
100°C to 1300°C
The Cyclops Model 878 is a spherical blackbody source. It consists of an inner black sphere that sits inside a spherical furnace and is suitable for use as a radiation source for infrared thermometers.
35°C to 650°C
During a recent Isotech seminar, twenty experienced engineers from many parts of the world were asked to produce their ideal specification for industrial Dry Block Calibrators. The result is our new range of Fast-Cal dry block calibrators
-35°C to 140°C
During a recent Isotech seminar, twenty experienced engineers from many parts of the world were asked to produce their ideal specification for industrial Dry Block Calibrators. The result is our new range of Fast-Cal dry block calibrators.
30°C to 350°C
During a recent Isotech seminar, twenty experienced engineers from many parts of the world were asked to produce their ideal specification for industrial Dry Block Calibrators. Their top ten requirements, in order of priority, are listed below. 1. Rugged 2. Light weight 3. Easy to use on site 4. Low cost / high benefit ratio 5. Fast response, high stability 6. Time saving features 7. Multiple sensor testing 8. Software 9. Modern design 10. Compliant with the latest regulations The result is our new range of Fast-Cal dry block calibrators
Fluidised Furnace Model 875
50°C to 700°C
The Isotech fluidised calibration bath out performs dangerous salt baths in all respects: wider temperature range, less hazardous and better uncertainties.
Gallium Fixed Point Apparatus
Automate your Gallium point! Model 17402B Gallium Apparatus is not an adaptation from general purpose equipment, but is designed specifically to realise and maintain the Gallium Cell on the melt plateau, for calibration of thermometers on the International Temperature Scale of 1990.
Gallium Fixed Point Cell
-38°C to 660°C
Second only to the Water Triple Point and in many ways, because of its ease of use and purity, superior to it, is the Gallium Melt Point. At 29.7646°C, this is a very convenient temperature, as it is the closest ITS-90 fixed point to ambient temperatures, and also close to human body temperatures, which are critical ranges for many industries.
Gas Flow Model 984
The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body.
Gemini R Model 976
30°C to 550°C
The Gemini R 550 Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers.