How can we help? +44 (0)1704 543830 | info@isotech.co.uk

DESCRIPTION

Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples.

These switches have been designed for use in conjunction with our TTI range. The switches allow easy selection of connected sensors. They can be operated from either the front panel switch or from an RS232 interface that is provided as standard. Channel status is indicated via front panel LEDs. The Selector switches can be located adjacent to the sensors being calibrated, giving more flexibility than a permanently connected or stacked system.

The PRT Switch has 4mm terminal posts that can accept bare wires or 4mm plugs. The thermocouple switch has eight miniature thermocouple connectors. These thermocouple connectors are thermally bonded to a platinum resistance thermometer that measures the temperature of the connector and hence the “cold junction”.

The TTI range temperature indicators feature the ability to measure a remote cold junction and this permits a mixture of thermocouple types to be connected through the box. The I-Cal software supports Switchbox models 954 and 958 and, for automatic operation, two boxes can be connected together with a “master / slave” lead allowing them to be controlled from a single RS232 port and up to 16 sensors to be switched.

The software can automatically switch between the boxes and connect the appropriate output to the TTI. This 16 channel operation is not convenient without the software and manual operation of two boxes together is not recommended.

SPECIFICATION

Technical FeatureValue
Model954 RTD Selector Switch958 TC Selector Switch
ChannelsEight – four wire (four pole)Eight – two wire (two pole)
ControlFront panel switch and RS232Front Panel switch and RS232 (Also compatible with Isotech VLT system)
Connectors4mm Terminal PostMiniature Thermocouple Connectors
International Circuit Resistance<250mΩ<250mΩ
Thermal EMF, typical2μV after 1 minute of channel set 6μV after 30 minutes of channel set2μV after 1 minute of channel set 6μV after 30 minutes of channel set
Reference Junction Measuring Device100Ω 1/10 Din Pt100100Ω 1/10 Din Pt100
Thermal Coupling<0.2°C *Basis of test. At ambient 20°C ±2°C the internal Pt100 agreed with the connected thermocouples to ±0.2°C (including all measurement errors) using IEC584-1995 and IEC751-1995. The uncertainty of this test was ±0.3<0.2°C *Basis of test. At ambient 20°C ±2°C the internal Pt100 agreed with the connected thermocouples to ±0.2°C (including all measurement errors) using IEC584-1995 and IEC751-1995. The uncertainty of this test was ±0.3
Power5 VDC 100-250 VAC, 50/60Hz Power Supply Included5 VDC 100-250 VAC, 50/60Hz Power Supply Included
DimensionsHeight 91mm Width 141mm Depth 165mm Weight 1kgHeight 64mm Width 141mm Depth 165mm Weight 1kg
How to order954 TC Selector Switch958 TC Selector Switch

Downloads

8 Way Selector Switches Models 954 and 958

Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples.

  • Eight Channel - Local and RS232 Control
  • PRT and Thermocouple Models
  • Use with Isotech TTIs and Automation Software

We are online and ready to chat to you if you need any advice and support, or if you prefer you can fill out the form below.

Chat Now
  • This field is for validation purposes and should be left unchanged.

Or call +44 01704 543830

youtube linkedin

Welcome to ISOTECH!

We have a local distribution partner who can help you. More information can be found here:

www.isotechna.com

Continue