This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
DESCRIPTION
- Proven Use
- ±0.005°C stability and gradients
- Will House Several Resistors
This bath is the result of many years of development and is used to maintain the temperature of standard resistors used with thermometry bridges. It can also be used with the Automatic Resistance Bridge Calibrator, A-RBC.
Heating and cooling is accomplished by efficient solid-state Peltier chilling modules giving optimal control around ambient. Solid state cooling ensures minimal power consumption, silent operation and no vibration.
Stability and temperature differences total less than ±0.015°C when measured directly in the oil of the bath and ±0.003°C when measured inside a Fixed Standard Resistor.
The bath will house several Resistors depending on their size and is ideal for measuring the temperature coefficients of Fixed Resistors, as well as maintaining them at a selected temperature.
The oil used in the bath is very special, it has to be very high resistance and very low viscosity. Wrong choice of oil will cause larger temperature gradients and may cause the motor to burn out.
Updated Control System
The control system has been updated and now features a large colour display with crystal clear graphics. An Ethernet interface allows the bath temperature to be remotely monitored. For applications where it is necessary to change the bath temperature to determine the resistor temperature coefficient the bath can be programmed to step through a series of temperatures at a controlled ramp rate. Other features include data logging of the bath temperature along with the air intake temperature – the data can be exported to a USB drive.
SPECIFICATION
Technical Feature | Value |
---|---|
Model | 455 |
Temperature Range | Dew point to 40°C |
Accuracy | ±0.005°C stability and gradients |
Control | 0.01°C Resolution |
Power | 15w typical, 100-130 or 208-240Vac*, 50/60Hz (*field changeable) |
Dimensions | Height 910mm, Width 635mm, Depth 710mm, Weight 66kgs |
Accessories | 935-19-72-35 litres of special oil |
How to order | 455 Standard Resistor Maintenance Bath. Please specify voltage required. Please specify number and type of resistors. |
DOWNLOADS
Standard Resistor Maintenance Bath
Dew point to 40°C
This bath, Model 455, is the result of many years of development and is used to maintain the temperature of standard resistors used with thermometry bridges. It can also be used with the Automatic Resistance Bridge Calibrator, A-RBC.
- Proven Use
- ±0.005°C stability and gradients
- Will House Several Resistors
We are online and ready to chat to you if you need any advice and support, or if you prefer you can fill out the form below.
Or call +44 01704 543830