DESCRIPTION
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points.
It may be used as a blackbody source over the range 450°C to 1090°C.
The furnace heater is of the non-inductive bird-cage design insulated by twin bore alumina tubes. The heat pipe is designed so that the inner wall is not subject to thermal expansion stresses from the outer wall before the heat pipe reaches conduction temperature. The working fluid is permanently and safely sealed within the plasma-arc welded enclosure.
SPECIFICATION
| Model | 426 |
| Temperature Range | 450°C to 1100°C |
| Emissivity | greater than 0.995 |
| Stability | ±0.05°C |
| Display Resolution | 0.1°C to 999.9; 1°C from 1000 to 1090 |
| Cavity Size | 50mm diameter 300mm deep |
| Time to temperature | 4 hours |
| PC Interface | Included |
| Supply | 110Vac, 3kW, 50/60Hz CTE (230Vac and 110Vac to 110Vac Isolating Transformers available.) |
| Dimensions | Height 410mm Width 415mm Depth 280mm |
| Weight | 30.5kgs |
| Options | Aluminium Primary BlackBody Fixed Point Cell 998-06-00D Silver Primary BlackBody Fixed Point Cell 998-06-00E Copper Primary BlackBody Fixed Point Cell 998-06-00G Gas Flow System-984-00-00. 230v/110v Transformer-935-19-43. 110v/110v Transformer -935-19-48 |
| How to order | Model 426 Oberon R – Please state voltage required. Please state any special calibration requirement. |
DOWNLOADS
Oberon R Model 426
450°C to 1100°C
Model 426 is for Aluminium, Silver or Copper slim fixed point cells as well as for comparison calibration. Heatpipes provide the ideal conditions for the creation and maintenance of slim ITS-90 cells.
- 50 x 300mm Calibration Volume
- Compact Heatpipe Furnace
- Suits Aluminium, Silver or Copper Fixed Points
- Can be used for comparison and infrared calibration
We are online and ready to chat to you if you need any advice and support, or if you prefer you can fill out the form below.
Or call +44 01704 543830
Related products
-
Read moreBlackbody ITS-90 Fixed Points
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep.
-
Read moreMedusa R Model 999
30°C to 550°C
The Medusa R Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C.
-
Read moreBlackbody Source Model 988
20°C to 45°C
First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus.
-
Read moreGreybody Source Model 975
50°C to 350°C
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers.
